Quick-Ohm , Component,Heat management, high tech ceramic Sitemap Imrint German

High-Tech-Ceramic

 
back      contact

Nozzles

Sapphir waterjet nozzles type 18     - 4000 bar

 
Waterjet nozzle Waterjet nozzle
   
Suitable for the following cutting heads:
 Passend auf folgende Schneidköpfe:
 Adaptables sur les têtes de découpe suivantes
Böhler Schneidkopf, Trumpf, Flow, Tecnocut
   
ordering-code
Bestellbezeichn.
Diameter T
(mm) (inch)
FLN-Y-1808 0.08 0.003
FLN-Y-1810 0.10 0.004
FLN-Y-1812 0.12 -
FLN-Y-1813 0.13 0.005
FLN-Y-1815 0.15 0.006
FLN-Y-1817 0.17 -
FLN-Y-1818 0.18 0.007
FLN-Y-1820 0.20 0.008
FLN-Y-1823 0.23 0.009
FLN-Y-1825 0.25 0.010
FLN-Y-1828 0.28 0.011
FLN-Y-1830 0.30 0.012
FLN-Y-1833 0.33 0.013
FLN-Y-1835 0.35 0.014
FLN-Y-1838 on request 0.38 0.015
FLN-Y-1840 on request 0.40 0.016
FLN-Y-1845 on request 0.45 0.018
FLN-Y-1850 on request 0.50 0.020
FLN-Y-1855 on request 0.55 0.022
FLN-Y-1860 on request 0.60 0.024
FLN-Y-1865 on request 0.65 0.026
FLN-Y-1870 on request 0.70 0.028
FLN-Y-1880 on request 0.80 0.031
FLN-Y-1890 on request 0.90 0.035
FLN-Y-18100 on request 1.00 0.039

Synthetic sapphire features excellent characteristics. Because of those characteristics this nozzles offer a longer life time and cause less changeover time:

Characteristics:
  • inert and very resistant against aggressive media
  • excellent heat conductivity (particularly at kryotemperatures
  • also excellent heat resistance and resistance against thermal shocks.
  • brilliant resistance against scratching and wear
  • good resistance against corrosion and abrasivity
  • extreme hardness (behind diamond the most hard technical material)
The nozzle is made of stainless steel, brass seal and sapphire stone.  Upon request, it is also available with other hole diameters, a synthetic  seal and/or a ruby stone.

Die Düse wird aus rostfreiem Stahl, einer Messingdichtung und einem  Saphirstein hergestellt. on request kann sie auch mit anderen  Lochdurchmessern, einer Kunststoffdichtung und/oder einem Rubinstein  geliefert werden.

La buse est fabriquée à d'acier inox, joint en laiton et pierre en saphir.  Sur demande elle peut aussi être livrée avec d'autres diamètres de trou,  un joint synthétique et/ou avec une pierre en rubis.