| |
HIGH DENSITY PELTIER MODULES (HDPM) |
| |
Features
Maximum cooling density up to 18 Watt/cm²
Example
High Density Peltier-Module 40 x 40 x 0.55 mm transfers > 250 Watt (Qcmax)
Standard Peltier-Module 40 x 40 x 0,55 mm transfers ~ 100 Watt (Qcmax)
Increase of cooling capacity, compared with standard Peltier modules is > multiplier 2-3.
|
 |
| |
Technical parameters:
- Maximum temperature drop ΔT max at I=I max , Q=0 – within range 60-67 K.
- Heat flow density output on TEC's cold side in maximum cooling capacity mode at I=Imax and ΔT = 0 – within range 7 - 18 Wt/cm².
- Maximum current at ΔT = ΔT max – within range of 10 - 25 A.
- Heat absorbing surface area of the module – within range of 4 - 27 cm².
- Module height: within range 3.00 - 4.00 mm.
- Height of thermoelements: within range 0.30 -0.55 mm.
- Elements cross-section area: within range 0.50 - 2.00 mm.
- Number of the thermoelements in module; within range of 30 - 290 n-p pairs (couples').
|
| |
 |
| |
HIGH DENSITY PELTIER MODULES (HDPM) |
| |
- HDPM is a new high tech development
- HDPM’s are exclusively customized Products
- A minimum quantity is necessary
- HDPM’s can have customized geometry
|
